Apple Electroniks

Digital Pull Tester - Pull Tester - Automatic Pull Force Tester - Automatic Pull Tester - Elongation Tester - Tension & Compression Tester - Automatic Penetration Force Tester - Digital Force Tester - Automatic Penetration Tester - universal testing machine

Application 

Automatic Force Tester/Automatic Penetration Force Tester is unique instrument for tension/compression & Penetrability testing with good stability, wide application and convenient usage with function of step less speed adjusting, uniform motion, converting mode between manual and automatic operation. It is used for various application such as breaking strength, compression and tensile testing of yarn, strips & even Puncture / Piercing force of Syring or hypodermic needle in Rubber stopper, Piercing Force, Penetration test, Measuring Strength of Glass Ampules, Breaking strength & many more.

 

Features:

• Simple operation, able to be used with various kinds of fixtures.
• Step less speed regulation, gear drive
• Compact design & structure with stable drive

 

Specifications:

• Capacity : 500N (50Kg) /1000N (100Kg)
• Accuracy : 0.1N / 0.01kg / 0.02lb;
• Units : N, Kgf, Lbf
• Traveling Length : 200mm / 400mm(Optional)
• Speed Selector : 25 to 280 mm/min
• Data Output : RS232 communications

 

Power/Air : 220 /110 V 50/60 Hz 

Weight : 45 Kg

Dimensions : 450 x 400 x 700 mm(LxWxH)

UTM - Universal Tensile Tester - Fabric Testing Machine - Fabric Strength Tester 

We are the foremost Manufacturer, Exporter and Supplier of Fabric Tensile Strength Tester.

It is designed to test a wide range of tension, bursting, tear, elongation, constant load, elastic, thread slip, peeling and other mechanical properties. A PC-controlled machine equipped with motor and quality ball-screw for ideal and smooth control. 

Equipped with a quality load-cell with an accuracy of 0.2% of the applied load value, from 1% to 100% of the load-cell capacity. Further, The machine has a huge assortment of specimen grips and fixtures available, allowing the wide range of test methods. Automatic pneumatic fixtures / clamps are offered.

Specifications

l           Windows based software operated and closed-loop controller controls. AC servo motor drives quality Ball-screw

l           High speed RS232 connects computer and machine, controlled by a special Textile Tensile Testing Software. All test methods which customer requires can be programmed before shipping.

l           Test capacity: 2.5/5.0kN.

l           Test space: 400mm (W)  x 600 mm (H)

l           Load measurement accuracy: +/-0.2% (1% ~ 100%FS)

l           Resolution of load: 0.1N

l           Displacement resolution and accuracy: 0.01mm.

l           Speed range and accuracy: 0.01 ~ 1000mm/min, error ≤ ± 2%

l           Working space: H 800mm x W 420mm

l           Sample holder : pneumatic clamping

l           Built-in intelligent active force and displacement alarm system.

l           High-resolution digital closed-loop controller

l           Operating temperature range : 0 to 38 degrees C

l           Storage temperature range: -10 to 45 degrees C

l           Humidity range: 10% to 90% non-condensing, web bulb method

Standards  

·         ISO 13934.1/2, ISO 13935.1/2, ISO 9073.3/4, ISO4606, ISO 1798,

·         ASTM D76, ASTM D5034 / 5035, ASTM D2261 / D434 / D4964 / 5587 / D3936,

·         FZ/T 20019 / 70006 / 70007/ 01085 / 01030,

·         JIS L1093, BS, DIN & many more.

Additional Information:

• Item Code: UTT
• Production Capacity: 10
• Delivery Time: 30 Days
• Packaging Details: Wooden box packing

Fryma Fabric Extension Tester - Fabric Extensometer

Application

Fryma Fabric Extension Tester, to simply and economically determine the stretch and recovery of textile fabrics, both knitted and woven. The apparatus consists of a loading frame with clamps and a screw tensioning device, two 3kg loading Weight s and sample cutting templates.

Specification

• Test time: 10+/-3 s
• Optional Accessories
• Loading Weight: 3 Kg / 6 Kg
• Weight 15 Kg
• Dimensions 360x170x170mm(LxWxH)

Standards:

 

Application 

Circular Locus Tester, to determine surface deterioration and quality of fabrics (wool, chemical fiber, mixed, kitted and woven fabrics). Using an active friction system, fabric is rubbed against a nylon brush and abrasive or an abrasive only under controlled conditions. Results of the test are achieved in minutes. The relative motion of the locus specimen grip and the abrasive platform is a circle with a relative speed of 60+/-1 r/min. The grip offers pressure to the specimen which is adjustable with a tolerance of +/-1%. For added control and safety, the machine is equipped with a self-stop switch.

Specifications

• Test motion: Circular Locus of Dia. 40mm
• Test speed: 60 ± 1 r/min
• Height of Brush: 2 – 12mm, adjustable
• Pressure on specimen: 490cN, 590cN, 780cN,.
• Dimension of specimen: Dia. 113±0.5mm (100cm2)
• Counter: 1 – 9,999 times, stop automatically

 

Standard Consumables

• Standard Abradant gabardine – 2 Pcs
• Standard Backing Foam – 4 Pcs
• Standard Photographic – 1 Set 

Standards GB/T 4802.1-2008 

Power 220 /110 V 50/60 Hz 

Weight 45 Kg

Dimensions 550x260x380 mm(LxWxH)

Fiber Linear Density Tester

Application:

Fiber Linear Density Tester has been developed to measure the fiber linear densitybased on the string vibration principle. It measures and displays the linear density ofsingle tested fiber, and also calculates and displays the mean value, and thevariation coefficient of the tested fibers. The printer connected with the apparatusprints the measured results when it is needed. The apparatus is controlled by a microprocessor. It works according to theself-oscillation principle and measures with high precise. It is easily operated andthe operating errors can be reduced. The apparatus accords with the demands of the national standardGB/T16256-1996, the international standard ISO1973-1995, and the standardizedmeasuring method of BISFA. It is used to measure the linear density of the fiber andcan be used widely in synthetic fiber manufactories, fiber-testing inspection bureauand scientific research institutions, etc.

Specifications:

• Fineness measurement range: 0.8 ~ 40 dtex;
• Fineness error: ≤±2%;
• Vibrating fiber length: 20mm;
• Length error: ≤±1%;
• pretension clamp precision: ≤±0.5%;
• Frequency error: ≤±0.5%;

Standards:


Power : 220/110 V 50/60 Hz
Weight : 10 Kg
Dimensions : 393×300×320mm (LxWxH)

Brush or Sponge Pilling Tester - Brush Pilling Tester - As per ASTM D3511

Application

Brush Pilling Tester, To determine the pilling propensity and simulate normal wear of knitted and woven fabrics used in apparel and automotive interiors by brush and/or sponging specimens together in a circular motion to form pills. Specimens are evaluated under standard lighting conditions using a pilliscope, light cabinet or similar, against users’ standard fabrics or piling photographs.

Specification

The plate including Polyurethane foam

Circle sample holder: 660g

Height of Nylon brush: 25.4mm

Consist of 6 Holders, rubber edge grips, sandpaper.

Rotation speed: 58 r/min

Sponge dimension: 51x102x152 mm

Optional accessories

Kit for GM9652P adds 6 square sample holders and automatic cycle controller

Kit for FORD BN-108-03 adds 6 square sample holders and special sponge board

Kit for FORD BN12-4 including adapter board, 3 square specimen holder

Power : 220 /110 V 50/60 Hz
Weight: 90 Kg
Dimensions : 920x400x320 mm(LxWxH)

Standards:
Test Standards conforms to :ASTM D3511FORD BN12-4/108-03GM 9652P
For more test standard, please contact us

Digital Fabric Bursting Strength Tester - Fabric Bursting Strength Tester - Bursting Strength Tester

Application

Digital Fabric Bursting Strength Tester, To determine the bursting strength and bursting distension of knitted or woven fabrics, non-woven fabric and other fabrics.

Specifications / Features

• High-accuracy servo-motor driving system
• Automatic-clamping offers firm and reliable clamping
• Large colourful touch panel, can be operated without computer
• Automatic induction and bursting system, can be connected with computer and printer (not offered), test curve, test result is easy to be red and outputted.
• Equipped with memory and printing function, supporting on-line operation.
• Internal diameter of sample clamp: Φ30.5mm+/-0.05mm (7.3cm2) Φ79.8mm+/-0.05mm (50cm2)
• Measuring range: 0~6Mpa
• Max. extend strength: 80mm
• Max. bursting times: 30.0s
• Power 220 V 50Hz
• Weight 105 Kg
• Dimensions 550x400x600 mm(LxWxH)

Standards:

 

AATCC Accelerotor

Application 

AATCC Accelerotor,  to rapidly determine abrasion resistance of flexible materials including textiles, paper, leather and plastics in both wet and dry conditions. Samples are rapidly tubled within a cylindrical test chamber lined with an appropriate abrasion material. The tumbling action is provided by a propeller shaped rotor for a predetermined time at a predetermined speed. Wet and dry

The abrasion resistance is evaluated by determining the weight loss of the specimen or grab strength loss of the specimen when broken at an abraded fold line.

Specifications

 

• Test speed: 3000 r/min
• S-shape rotor, 114mm.
• Test cylinder: Dia 140mm, 70mm depth.
• Timer: 0.1s ~ 99h, stops automatically

Standards AATCC 93, M&S P26 / P53, NEXT 31

Power 220 /110 V 50/60 Hz 3A

Weight 26 Kg

Dimensions 480 x 220 x 320 mm(LxWxH)